Built for mission-critical transport, the Pelican 1750 Protector Case safeguards firearms and gear with a high-impact shell, precision O-ring seal, and dense foam interior for unmatched shock and weather resistance. Trusted by military and law enforcement, it sets the standard for rugged, field-ready protection.
The Protector 1750 Long Case is built from a rugged polypropylene resin for exceptional durability, creating a watertight, crushproof, and dustproof enclosure. Its reinforced lid-to-base corner points and four locking cleats enhance structural integrity and stacking strength, ensuring reliable protection and stable storage in demanding environments.
Exterior
Measuring 53.5″ (L) × 16.05″ (H) × 6.13″ (W), the 1750’s exterior is molded from Pelican’s proprietary polypropylene with a reinforced open-cell core, delivering maximum structural strength and an impact-resistant, field-ready shell.
The 1750 is outfitted with four C-clamp ABS throw latches engineered for a tight, positive lock that compresses the O-ring gasket to maintain a fully watertight seal, even under impact or vibration. These heavy-duty latches, reinforced by stainless steel hinge pins, deliver long-term strength and secure closure in demanding environments. A folding mid-length handle and a top/bottom foldable handles ensure balanced carry and stable stacking during transport or storage.
The 1750 features stainless-steel padlock protectors built to resist cutting and prying, and include an automatic pressure-equalization valve with a 3-micron hydrophobic non-woven membrane to keep water out while balancing internal pressure. The padlock holes accept shackles up to 0.31″ (≈ 8 mm) in diameter, ensuring compatibility with most heavy-duty locks that fit securely through the reinforced protectors.
The 1750 is equipped with smooth-glide polyurethane wheels set in stainless-steel ball-bearing housings, delivering quiet, low-friction mobility over a variety of surfaces. The wheels are recessed into the base for protection against impact and feature a wide tread design that enhances stability and prevents wobble during transport, even when fully loaded.
Interior
With an interior space of 50.38” (L) x 13.33” (H) x 5.33” (W), the 1750 has an overall internal storage capacity of 2.07 ft³.
A continuous EPDM O-ring gasket lines the lid of the 1750, creating a watertight, dustproof barrier when the latches are secured. Engineered for flexibility across extreme temperatures, this chemical-resistant seal upholds the case’s IP67 rating even through pressure changes or brief submersion. For lasting performance, Pelican recommends occasional cleaning of the O-ring channel and a light application of 100% silicone lubricant to maintain elasticity and peak sealing strength.
The Pelican 1750 comes with a three-piece foam set made from open-cell polyurethane, designed for customizable interior protection. It includes a solid base layer, a center layer, and a convoluted (egg carton) lid layer. This foam provides excellent shock absorption, dispersing impact and vibration during transport, while allowing a snug, tailored fit that keeps equipment secure. Fully removable and replaceable, the foam can be reconfigured or refreshed as needed to accommodate changing gear.
Specifications:
- Foam Layers………………..…1.63″ each
- Minimum Temperature…-40° F (-40 ° C)
- Maximum Temperature…210° F (99 ° C)
- Max Buoyancy Weight……136.91 lbs.
- The Protector series comes with Pelican’s Limited Lifetime Guarantee of Excellence
The 1750 Protector Long Case is available in Black (featured), Desert Tan, and OD Green.
Re-Set Kit for 1750 Protector Case
Released at SHOT Show in 2025, the Re-Set was Pelican’s answer in creating a reusable modular interior system, designed to provide customizable and secure organization within various Pelican long cases. Unlike the traditional foam inserts that require cutting or permanent modifications, the Re-Set system utilizes a grid of high-density foam pegs set into a plastic frame.
Included in each pre-assembled Re-Set are the necessary, 1″ diameter high-density foam pegs (with with a few extra). These can be pulled/pushed as necessary to form any required shape.
Support caps are used in conjunction with foam pegs in both key corners, and several mid-points to create the necessary negative space that allows for the custom dimensions.
Holding it all in its prescribed shape is a plastic grid with slots the same size as the diameter of the pegs themselves. The pegs slide with enough friction against the grid to ensure no accidental slippage, while retaining support and protection to the items inside. The Re-Set kit also comes with an alternative grid for optics with larger turrets. The configuration can be changed endlessly.
Product Evaluation Scores:
- Cost – Average (3/5): With an MSRP of $357.95, the Pelican Protector 1750 sits in the upper mid-range of Pelican’s larger Protector series. Its reinforced construction and dense polymer shell provide exceptional durability, designed specifically for the demands of law enforcement and military use. Following Pelican’s 2017 acquisition of its closest competitor, Hardigg, few brands now produce large-format cases with comparable structural integrity—further cementing Pelican’s position as a global leader in hard polymer protective cases. Comparable models in size include the VEVOR 50-inch IP67 Rifle Case ($108.99), the Eylar 50-inch XXL Deep Roller Case ($469.99), the Nanuk 996 Hard Case ($449.95), and the Plano 52-inch Long Gun Case ($199.99). Of these, only the Nanuk and Eylar cases approach Pelican in overall design quality and material strength, while the lower-priced VEVOR and Plano options trade off durability for affordability. Considering performance, build quality, and price across the market, the 1750 Protector occupies a balanced and justified position within its segment. When you include the cost of the Re-Set for the 1750 ($229.95) it can feel as if the total cost is rather steep for a hard case. But considering for every time the end-user custom cuts the interior foam and then changes the layout or rifle configuration, the 3-piece foam set itself needs to be re-ordered ($133.95). If, over the lifespan of the case, the end-user reconfigures the interior twice then the cost will have surpassed the cost of the Re-Set itself. So if the end-user is necessitating frequent reconfiguration of the rifle, putting the foam through excessive usage, or case interior, the Re-Set could easily offset the cost of endlessly cutting/re-cutting/replacing the foam interior.
- Comfort – Good (4/5): As a 53-inch single-rifle case with a slim, elongated profile and foldable handles, the Pelican 1750 offered a well-balanced combination of protection and portability. Despite its full-length design, the case remained easy to maneuver and never felt cumbersome when carried or lifted. Its interior dimensions provided sufficient space for a full-sized bolt-action rifle, carbine, shotgun, or short-barreled rifle (SBR), while still allowing room for accessories such as slings, magazines, or optics—depending on the configuration and overall size of the firearm. When fully loaded, the case naturally gained weight beyond its 26.7-pound base, but its limited internal depth effectively prevented overpacking and kept the total load within a manageable range. The dual foldable carrying handles were positioned to distribute weight evenly, minimizing hand strain during transport. Their ergonomic design provided a stable and secure grip whether the case was carried by hand or lifted into a vehicle. The integrated polyurethane wheels rolled smoothly and quietly across uneven terrain and hard surfaces, requiring minimal effort to move. Reinforced edges and deep locking cleats not only enabled secure stacking but also contributed to the case’s overall torsional rigidity, improving stability during transit. Together, these design elements gave the case a solid sense of balance and control while in motion. Overall, the Pelican 1750’s ergonomic features, reinforced construction, and efficient internal layout made it a practical, travel-ready option for users who frequently transported firearms or precision equipment—combining long-term durability with thoughtful, user-centered handling design.
- Durability – Good (4/5): The primary material used in the Pelican 1750 (as with most of Pelican’s Protector series) is its proprietary polypropylene copolymer resin, a specific type of high-density thermoplastic known for its exceptional impact resistance, structural rigidity, and chemical stability. This material contributes to the case’s ability to withstand heavy use, including drops, compression, and exposure to harsh environments (including UV light), without cracking or deforming. Its molded construction also incorporated an O-ring seal (which Pelican—or Peli as it is known overseas—has a maintenance recommendation for) and automatic pressure equalization valve, helping maintain watertight integrity and internal pressure balance when subjected to changes in altitude or temperature. Inside, the case featured open-cell polyurethane foam inserts, designed to cushion and stabilize stored equipment. The foam provided strong impact absorption and could be custom-cut (via “pick-and-pluck” sections or user trimming depending on choice at time of purchase) for a precise fit around rifles or accessories. However, as intended by design and over longer durations of time, the foam will tear or degrade somewhat easily after repeated reconfiguration—reflecting its purpose as a sacrificial, replaceable layer rather than a permanent interior lining. During testing, the case endured being dragged over rocks, thrown into a vehicle multiple times, and left exposed to rain and cold without any compromise to the foam or stored contents. Aside from minor external surface scuffs, there was no moisture or dust ingress or functional degradation observed. These results were consistent with Pelican’s IP67-rated performance claims. Each Pelican Protector case is backed by the manufacturer’s limited lifetime guarantee, which covers functional damage or defects for the life of the product—further underscoring the brand’s confidence in its long-term resilience. The Re-Set pegs themselves are made of a similar high-density foam as found in packaging of high-end firearm, medical, and other expensive products. Despite the close fit to the plastic matrix that holds the pegs, their continual friction points did not flake, erode, and otherwise damage the pegs—illustrating the tight tolerances between the two to allow movement/adjustment but not to be damaging.
- Functionality – Good (4/5): The Pelican 1750 followed a straightforward design: a rigid, foam-lined hard case that opened, closed, and locked securely. During use, it provided consistent protection for stored equipment, and the range of Pelican cases allowed users to select a size suited to their needs. The interior foam could be customized to fit specific items. Once cut to a shape, the foam was less suitable for other items or its parts were exchanged unless a generalized pattern was used in the cutout. Optional accessories, such as the EZ-Click MOLLE Panels (not included in this review), could replace sections of foam on the lid and allow for mounting additional items, increasing flexibility. Features such as the polyurethane wheels and automatic pressure equalization valve improved portability and usability, especially when moving the case over longer distances or storing it in varying environmental conditions, such as those near coastlines or in temperate environments. The stainless-steel reinforced hasps and hinge pins added security and rigidity, making forced entry difficult without damaging the case. Overall, the case delivered consistent protection, transportability, and customizable storage. When setting up the Re-Set, it was helpful to have a large, flat surface to lay everything out. The pegs and plastic grid arrived pre-assembled and drop-in ready, which saved a great deal of time. Swapping the case’s foam and configuring peg positions was straightforward, and Pelican’s setup guide clearly explained the parts and installation. An alternative turret grid was useful for optics with large or bulky adjustment turrets, but with the Vortex scope on the ADM-10 and the lid foam in place—it wasn’t necessary. The only drawback if using the turret grid would be that users would need to physically transfer pegs between the grid types. Once the Re-Set was configured, the rifle never shifted, slipped, or moved during multiple trips. This was attributed to the smaller-diameter pegs that provided a tighter, more precise fit than Magpul’s larger DAKA grid organizer blocks. The Re-Set’s configurations were limited only by the case dimensions, and it could be reused indefinitely.
- Weight – Good (4/5): At 26.7 pounds (with all the included foam), the Pelican 1750 remained manageable by the foldable mid-length handle or on its top-mounted wheels, and fully loaded it stayed transportable with the wheels providing a practical alternative. The Re-Set kit for the 1750 weighed in at 7.9 pounds, which added slightly more to the case’s total weight even after removing the necessary case foam that weighed roughly 5 pounds. The multiple handles still made it easy to control the case even if the added items caused the case to become unbalanced. By comparison, the VEVOR 50-inch IP67 Rifle Case (weighed 18.85 pounds), the Eylar 50-inch XXL Deep Roller Case (32.5 pounds), the Nanuk 996 Hard Case (28 pounds), and the Plano 52-inch Long Gun Case (20 pounds). The 1750’s slightly higher weight reflects its reinforced construction and dense polypropylene shell, delivering a level of protection and rigidity that lighter cases do not provide.
Overall Rating – Above Average (19/25)
Product Link: https://www.pelican.com/us/en/product/cases/long-case/protector/1750/
I am reviewing this product as a courtesy to the manufacturer and via High Ground Media, so that I can evaluate it and provide my honest feedback. I am not bound by any written, verbal, or implied contract to give positive reviews. All views are my own, and based off my personal experience with the product.
The views and opinions expressed on this website are solely those of the author. The views and opinions do not necessarily represent those of the administrative staff, and/or any/all contributors to this site.